Fabric blinds
Fabric does not block light, it scatters it. The room stays bright, the glare goes, and depending on the openness factor you still see out.
Wind-stable vertical fabric blind VSe ZIP / VSe EBA
A zip holds the fabric in the side guide. Nothing flaps, not even in wind — and the area can be correspondingly large.
What it is built for
Large glazed areas, conservatories, exposed south and west elevations. 18 m² in a single bay is possible without the blind retracting in wind.
View and light
The openness factor of the fabric decides how much you still see outside. We bring the fabric book — you cannot judge that on a screen.
- Clear height (hl)
- VSe ZIP 110: min. 400 mm – max. 2,600 mm · VSe ZIP 115: min. 400 mm – max. 3,300 mm · VSe ZIP 155: min. 400 mm – max. 5,000 mm (manual) / 6,000 mm (motor)
- Width (bk)
- VSe ZIP 110: min. 400 mm (manual) / 610 mm (motor) – max. 3,300 mm · VSe ZIP 115: min. 400 mm (manual) / 610 mm (motor) – max. 4,000 mm · VSe ZIP 155: min. 400 mm (manual) / 624 mm (motor) – max. 6,000 mm The minimum width depends on the drive.
- Maximum area, single
- VSe ZIP 110: 7.8 m² · VSe ZIP 115: 9 m² · VSe ZIP 155: 9 m²
- Retract at wind speed
- 92 km/h on small units, 76 km/h on large ones The speed at which the unit must be retracted depends on width, height and mounting. Wind and rain sensors reduce the risk of damage but are no guarantee against it. Responsibility rests with whoever operates the installation.
Source and conditions
Source: Technical Specifications Brochure — Slat blinds, Fabric blinds, Roller shutters, Shutter, edition 03/2026, page 13.
- Tighter limits apply with profile guides: the maximum height depends on the minimum width chosen, because the drive package needs room.
Technical drawings
Technical drawings from the Schenker Storen technical brochure, edition 03/2026.
Vertical fabric blind VS 95 / VS 150 / VSe
Shading that runs straight down, without zip guides. Cheaper and simpler, but wind resistance class 2 — it belongs somewhere that is not out in the open.
- Clear height (hl)
- VS 95: min. 400 mm – max. 3,000 mm · VS 150: min. 400 mm – max. 4,000 mm
- Width (bk)
- VS 95: min. 400 mm (manual) / 650 mm (motor) – max. 3,500 mm · VS 150: min. 400 mm (manual) / 650 mm (motor) – max. 4,400 mm The minimum width depends on the drive.
- Maximum area, single
- 9 m²
- Maximum area coupled, manual drive
- VS 95: 10 m² · VS 150: 12 m²
- Maximum area coupled, motor
- VS 95: 12 m² · VS 150: 18 m²
- Retract at wind speed
- 38.5 km/h The speed at which the unit must be retracted depends on width, height and mounting. Wind and rain sensors reduce the risk of damage but are no guarantee against it. Responsibility rests with whoever operates the installation.
Source and conditions
Source: Technical Specifications Brochure — Slat blinds, Fabric blinds, Roller shutters, Shutter, edition 03/2026, page 14.
- With Soltis fabric the maximum width is 3000 mm.
- With a bearing bracket the maximum width is 4000 mm.
Projecting blind AS 95 / AS 150 / ASR 95
The bottom edge swings outwards. That takes away the high sun and leaves the downward view open — in an office, the difference between shading and a cave.
- Clear height (hl)
- AS 95: min. 1,200 mm – max. 3,000 mm · AS 150: min. 1,200 mm – max. 4,000 mm
- Width (bk)
- AS 95: min. 400 mm (manual) / 650 mm (motor) – max. 3,000 mm · AS 150: min. 400 mm (manual) / 650 mm (motor) – max. 4,000 mm The minimum width depends on the drive.
- Maximum area, single
- AS 95: 8 m² · AS 150: 9 m²
- Maximum area coupled, manual drive
- AS 95: 10 m² · AS 150: 12 m²
- Maximum area coupled, motor
- AS 95: 12 m² · AS 150: 18 m²
- Retract at wind speed
- 60 km/h The speed at which the unit must be retracted depends on width, height and mounting. Wind and rain sensors reduce the risk of damage but are no guarantee against it. Responsibility rests with whoever operates the installation.
Source and conditions
Source: Technical Specifications Brochure — Slat blinds, Fabric blinds, Roller shutters, Shutter, edition 03/2026, page 17.
- From 3300 mm width, in reinforced construction.
Technical drawings
Technical drawings from the Schenker Storen technical brochure, edition 03/2026.
Projecting awning AM 95 / AM 150
The awning with visible arms, as fitted on many older buildings. Five arm lengths from 600 to 1400 mm.
Façade awning FM 150 / FMc
Up to 18 m² in a single bay, optionally with counter-tension gear. For façades where an ordinary blind stays too small.
- Installation height (EH)
- max. 4,000 mm — without fabric roller max. 2,900 mm
- Width, models 1 and 2
- max. 4,400 mm single, 8,800 mm coupled
- Width, models 3 and 4
- max. 3,500 mm single, 7,000 mm coupled
- Minimum width
- 750 mm · 950 mm · 1,150 mm · 1,350 mm · 1,660 mm · 1,860 mm · 2,060 mm · 2,260 mm · 2,460 mm The minimum width follows the bracket type chosen.
- Maximum area
- 9 m² single · 18 m² coupled
Source and conditions
Source: Technical Specifications Brochure — Slat blinds, Fabric blinds, Roller shutters, Shutter, edition 03/2026, page 20.
- The minimum width depends on the guide profile chosen; the nine values correspond to the bracket types.
- Inclination below 45° only with the counter-pull system (GZA).
- FM 150 GZA units can only be coupled under certain conditions.
